Its a fair point...i really need to look into switching over to the CBI. I need to quit my job so i can do this full time.
I have had my share of experiences with curve fitting, but i really thought i had a solid system this time. 10+ years of backtesting, 1000's of trades, consistent profit year after year...and then this slight change, which only impacted a few trades per year, radically altered the performance. Its really crazy since I had been tweaking positionscore with this system previously, causing it to take different sequences of trades, and the performance was staying solid. Not sure what to make of it... --- In [email protected], Mark Hike <markh...@...> wrote: > > I read Graham's note as that you can use the value in sell array to tell > what has happened, probably for reporting purpose. Obviously there is some > undocumented effect of setting the value. I would be wary of this kind of > "hack", because sometimes one doesn't really know what's going on. I like > the low level CBI because you can look at all the signals, positions, > trades, equity etc bar by bar and have total control of what's going on. > > As to your bigger problem, been there done that :-) > > On Wed, Sep 16, 2009 at 4:04 PM, Brandon_Ridenour < > brandon_riden...@...> wrote: > > > > > > > I had reached the same conclusion, that i would need to use the CBI to work > > around this, but I'm very happy to have avoided it. > > > > This problem only happens if you are managing your stops manually -- here > > is how you can fake it so it thinks you are using applystop(), and it solves > > this problem. Its in the notes at the bottom of the link. > > > > Now, my bigger problem is a system I have been using and had backtested > > over 10 years no longer performs adequately after making this change. :-/ > > > > ------- > > > > http://www.amibroker.com/guide/afl/afl_view.php?id=20 > > > > Graham Kavanagh > > gkavanagh [at] e-wire.net.au > > 2004-09-30 21:55:42 from equity comments > > > > Depending on kind of the stop various values > > are written back to sell/cover array to enable you to distinguish if given > > signal was generated by regular rule or by stop. > > > > 1 - regular exit > > 2 - max. loss > > 3 - profit target > > 4 - trailing > > 5 - n-bar stop > > 6 - ruin stop > > > > --- In [email protected] <amibroker%40yahoogroups.com>, > > "sdkingman" <markhike@> wrote: > > > > > > Interesting. I could not find anything in the user guide saying that you > > can set sell/cover signal to 4 or other value to affect the way stops > > behave. (The only thing I found was in Equity() function, sell/cover arrays > > would be filled with some number to indicate what kind of exit has taken > > place) > > > > > > To handle the complex situation you described, I think that low level CBT > > would be the right way to go. > > > > > > --- In [email protected] <amibroker%40yahoogroups.com>, > > "Brandon_Ridenour" <brandon_ridenour@> wrote: > > > > > > > > I may have found a solution to this. When I manually set the sell/cover > > signal, I am now setting it to a value of '4', rather than '1'. When setting > > it this way, ActivateStopsImmediately seems to apply properly. > > > > > > > > Basically, this fakes out as if I were using the ApplyStops function (i > > think) > > > > > > > > > > > > --- In [email protected] <amibroker%40yahoogroups.com>, > > "Brandon_Ridenour" <brandon_ridenour@> wrote: > > > > > > > > > > > > > > > I noticed this additional note: > > > > > > > > > > "a) (if you want to have stops executed AFTER regular signals, so > > cash from stopped out positions is NOT available to enter trades the same > > day) > > > > > ActivateStopsImmediately turned ON " > > > > > > > > > > > > > > > It seems to suggest that ActivateStopsImmediately addresses this > > issue of making sure the freed up equity is not made available the same day. > > > > > > > > > > > > > > > In my case, because I have custom stop logic and am not using the > > ApplyStops function, I am using regular Sell/Cover signals to close > > positions. I set tradedelays(1,0,1,0). > > > > > > > > > > If I understand the logic correctly, the backtester is improperly > > using my capital in this scenario, and because my stop logic is custom, > > activatestopsimmediately is not effective. > > > > > > > > > > Is there any way to prevent this issue from occurring? > > > > > > > > > > Thanks > > > > > > > > > > --- In [email protected] <amibroker%40yahoogroups.com>, > > "sfclimbers" <sfclimbers@> wrote: > > > > > > > > > > > > Read the notes provided for ActiveStops and see if you recognized > > your strategy. > > > > > > > > > > > > http://www.amibroker.com/guide/afl/afl_view.php?id=20 > > > > > > > > > > > > You may find that changing the setting (from AA window) for > > > > > > > > > > > > ActivateStopsImmediately will fix your problem. > > > > > > > > > > > > Mike > > > > > > > > > > > > --- In [email protected] <amibroker%40yahoogroups.com>, > > "Brandon_Ridenour" <brandon_ridenour@> wrote: > > > > > > > > > > > > > > > > > > > > > By the way, i have trade delays for Buy and Short set to 1, > > meaning it buys on the morning after the signal is generated. I just need it > > to use the available balance from either the day the signal was generated, > > or at the exact market open. It seems to be calculating available > > funds/balance based on the close of the next day. > > > > > > > > > > > > > > > > > > > > > --- In [email protected] <amibroker%40yahoogroups.com>, > > "Brandon_Ridenour" <brandon_ridenour@> wrote: > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > I have a system that opens positions only at the market open of > > a trading day. At market open, it should calculate the position size based > > on the funds currently available at that time. > > > > > > > > > > > > > > > > Today there was a signal at market open but no funds available. > > Later during the day, a trailing stop was hit on one of my open positions, > > causing that position to be closed. > > > > > > > > > > > > > > > > Tonight when I updated all quotes and ran the backtest, > > Amibroker shows the position from market open being opened, even there are > > no funds available. I can only assume that it believes funds were available > > because of the position which was exited later in the day. > > > > > > > > > > > > > > > > Obviously, the system should not be able to use funds which > > have not actually come available yet. How can I ensure that it will only > > open positions if the funds are available at market open? > > > > > > > > > > > > > > > > Thanks, > > > > > > > > Brandon > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
