Yes, It works most of the time for me also. That is why I have not sent it to support yet, because I can not reproduce it reliably, though it will happen at least once a day. I think it may happen only with a very slow chart that is busy when I hit enter, but I am not sure.
Best regards, Dennis On Nov 2, 2009, at 7:10 PM, Tomasz Janeczko wrote: > Hello, > > Tried that. I can enter number in param window and press ENTER and > it works just fine. > > Best regards, > Tomasz Janeczko > amibroker.com > ----- Original Message ----- > From: "Dennis Brown" <[email protected]> > To: <[email protected]> > Sent: Monday, November 02, 2009 11:49 PM > Subject: Re: [amibroker] Ami is exiting without an exit command > > > I have also seen this closing without warning or saving my data on > this last beta only. However, for me it has nothing to do with the > data feed. Instead, it closes when I enter a number into a slider > control in the param window and hit the enter key. If I just click on > some other control parameter it does not crash. It only does this on > occasion, so I have developed the new habit of not using the enter key > to complete a parameter entry. ;) > > BR, > Dennis > > On Nov 2, 2009, at 1:12 PM, reinsley wrote: > >> >> Barry, >> >> I got this issue from 5.26.5 to 5.29.2, as soon as TWS was running >> AB shuts. >> >> I fixed this way : downgrade to 5.20 then upgrade to 5.29.2. >> >> I lost few datas, but backfiiling recover the whole stuff. Backup >> your >> DB before. >> >> It's still running as a charm... >> >> Best regards >> >> Keith McCombs a écrit : >>> >>> >>> Joris -- >>> Have your lawyer call my lawyer. >>> -- Keith >>> >>> >>> Joris M.schuller wrote: >>> >>>> >>>> >>>> That is an _old problem that began in the AB 4.X days_. Suddenly >>>> for >>>> no apparent reason, not just at the start of TWS, AB would close. >>>> (In >>>> fact, I can’t rule out that it also happened with other data >>>> vendors >>>> such as IQFeed, QT) The first couple of times that was of course >>>> quite >>>> unsettling. After that you got used to it. It didn’t seem to >>>> corrupt >>>> anything, apart from losing some data and on occasion an unsaved >>>> AFL. >>>> It clearly _is an intermittent problem_, which are the hardest to >>>> solve. I spent more time on fault isolation than it was worth, but >>>> could isolate the problem to AB: Different mice, computers, OS even >>>> UPS all on occasion showed the same problem. Currently (in AB >>>> 5.20-5.26) the problem is much reduced. The _high tech solution I >>>> use_ >>>> (of course proprietary and copyrighted, not to mention unique and >>>> never done by anyone else before, in short encompassing all the >>>> customary claims made in this field) is placing the AB in the >>>> taskbar >>>> on the left next to the Start button. Then after an inadvertent AB >>>> close, I then (and again this is proprietary) move the cursor over >>>> the >>>> AB icon, place one of my fingers (index selection not critical) on >>>> the >>>> mouse and press the Left mouse button and click: Like magic AB >>>> starts >>>> up and re-appears. I hope that this explanation is explicit enough: >>>> Otherwise, don’t hesitate to contact Tomasz. >>>> >>>> >>>> >>>> *From:* [email protected] >>>> [mailto:[email protected]] >>>> *On Behalf Of *Edward Pottasch >>>> *Sent:* Monday, November 02, 2009 9:02 AM >>>> *To:* [email protected] >>>> *Subject:* Re: [amibroker] Ami is exiting without an exit command >>>> >>>> >>>> >>>> >>>> >>>> yes, see the AT group. In my case I have the TWS already started. >>>> Then I start AB and direct it to the IB database. AB starts >>>> backfilling data and suddenly disappears. But it does not happen >>>> always. Some days it does other days all is ok. When I restart AB >>>> after it has disappeared all is ok. It never happens twice in a row >>>> during 1 computer session. >>>> >>>> >>>> >>>> One thing I notice what I did not notice before (prior to 5.29 >>>> beta) >>>> is that when I start AB I see first the charts appear as white >>>> blank >>>> charts (a fraction of a second). Then it is replaced with the >>>> charts I >>>> saved previously. >>>> >>>> >>>> >>>> rgds, Ed >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> ----- Original Message ----- >>>> >>>> *From:* Barry <mailto:[email protected]> >>>> >>>> *To:* [email protected] >>>> <mailto:[email protected]> >>>> >>>> *Sent:* Monday, November 02, 2009 3:50 PM >>>> >>>> *Subject:* [amibroker] Ami is exiting without an exit command >>>> >>>> >>>> >>>> >>>> >>>> I start Ami and then TWS. Ami starts fine and once it starts I >>>> start TWS. When TWS starts Ami closes once in a while and I did >>>> not issue an exit command. I watch the monitor waiting for TWS to >>>> start back filling and when TWS starts Ami exits. This has been >>>> happening since I installed Beta 5.29. I currently have Beta 5.29 >>>> - 2 installed and it has happened on every 5.20 beta. It did not >>>> happen on 5.20. >>>> >>>> Is anyone else having this problem? >>>> >>>> Thanks, >>>> >>>> Barry >>>> >>>> No virus found in this incoming message. >>>> Checked by AVG - www.avg.com >>>> Version: 8.5.423 / Virus Database: 270.14.43/2474 - Release Date: >>>> 11/02/09 07:51:00 >>>> >>> >> >> >> >> ------------------------------------ >> >> **** IMPORTANT PLEASE READ **** >> This group is for the discussion between users only. >> This is *NOT* technical support channel. >> >> TO GET TECHNICAL SUPPORT send an e-mail directly to >> SUPPORT {at} amibroker.com >> >> TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at >> http://www.amibroker.com/feedback/ >> (submissions sent via other channels won't be considered) >> >> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG: >> http://www.amibroker.com/devlog/ >> >> Yahoo! Groups Links >> >> >> > > > > ------------------------------------ > > **** IMPORTANT PLEASE READ **** > This group is for the discussion between users only. > This is *NOT* technical support channel. > > TO GET TECHNICAL SUPPORT send an e-mail directly to > SUPPORT {at} amibroker.com > > TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at > http://www.amibroker.com/feedback/ > (submissions sent via other channels won't be considered) > > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG: > http://www.amibroker.com/devlog/ > > Yahoo! Groups Links > > > > > > ------------------------------------ > > **** IMPORTANT PLEASE READ **** > This group is for the discussion between users only. > This is *NOT* technical support channel. > > TO GET TECHNICAL SUPPORT send an e-mail directly to > SUPPORT {at} amibroker.com > > TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at > http://www.amibroker.com/feedback/ > (submissions sent via other channels won't be considered) > > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG: > http://www.amibroker.com/devlog/ > > Yahoo! Groups Links > > > ------------------------------------ **** IMPORTANT PLEASE READ **** This group is for the discussion between users only. This is *NOT* technical support channel. TO GET TECHNICAL SUPPORT send an e-mail directly to SUPPORT {at} amibroker.com TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at http://www.amibroker.com/feedback/ (submissions sent via other channels won't be considered) For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG: http://www.amibroker.com/devlog/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/amibroker/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/amibroker/join (Yahoo! ID required) <*> To change settings via email: mailto:[email protected] mailto:[email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
