Mike, Great - thank you very much for the input.
I had actually missed your reply and went on the internet to search for a solution. I did find 2 old blog posts describing a way to implement the e-ratio (which is exactly what I want to implement) I did reply to my own question before seeing yours, but it is not showing up - maybe because there were 2 links in it... In any case the overview of the solution was the following: My implementation of the Edge Ratio, included below, involves two profound Amibroker fudges. The first is the use of the AddToComposite function to create a composite ticker symbol in which to hold the ATR array of a given stock for later retrieval within the Custom Back Tester via the Foreign function. The second fudge is the use of the VarSet/VarGet function to create a quasi array. This was necessary to overcome the limitation where array elements cannot exceed in number the value of barcount-1. It seems to use the Custom backtester with the SetForeign function as well. I'll try both and I am sure they'll help me climb the Amibroker learning curve... --- In [email protected], "Mike" <sfclimb...@...> wrote: > > Hi, > Welcome to the group. AddColumn is used for explorations, not backtests. > To get what you are asking for, in a backtest, you would need write > custom backtester code to add your own custom metric. Custom metrics in > general are described here: > http://www.amibroker.com/guide/a_custommetrics.html However, that does > not cover your special case in that you will need to use > SetForeign/RestorePriceArrays to make your calculation: > http://www.amibroker.com/guide/afl/afl_view.php?id=54 Have a look at > the following and see if it is what you are after. The custom backtester > stuff is explained here: > http://www.amibroker.org/userkb/2008/03/16/amibroker-custom-backtester-i\ > nterface-2/ > I've additionally added support for printing out the ATR during an > exploration. Run your backtest to get some data. Then run an exploration > for the same date range and cross check the ATR values. There will be > some rounding errors. But, otherwise should match up. > I have not tested the code extensively, so do your own due diligence. > Mike > > SetTradeDelays(0, 0, 0, 0); SetPositionSize(2, spsPercentOfEquity); > weekDays = DayOfWeek(); > Buy = weekDays == 1; BuyPrice = Open; > Sell = weekDays == 5; SellPrice = Close; > SetCustomBacktestProc(""); > if (Status("action") == actionPortfolio) { bo = > GetBacktesterObject(); bo.Backtest(true); > dates = DateTime(); indices = BarIndex(); > for (trade = bo.GetFirstTrade(); trade; trade = bo.GetNextTrade()) { > SetForeign(trade.Symbol); entryBar = > LastValue(ValueWhen(trade.EntryDateTime == dates, indices)); > foreignATR = ATR(14); trade.AddCustomMetric("Entry ATR", > foreignATR[entryBar]); RestorePriceArrays(); } > bo.ListTrades(); } > Filter = Buy; AddColumn(ATR(14), "Entry ATR"); > --- In [email protected], "Jez" <jez@> wrote: > > > > Hi guys, > > Jut downloaded Amibroker at the weeekend - I started reading all the > user guide, AFL library, etc. (much better than my other software - > tradersStudio..). > > > > I am stuck with one thing though: I want to be able to backtest a > system and record the value of the ATR at the start of the trade for > each of the trades. I tried to imitate on the AFL Example - Enhanced > from the library and did something like: > > > > } else if (AASettings == 5) { > > // [Backtest] // > > SetTradeDelays(1, 1, 1, 1); > > AddColumn(ATR, "ATR", 1.3); > > } > > > > > > but that did not work. Any pointers on how I could get that done > please. > > > > The reason for this is that I want to calculate the e-ratio for a > trade entry signal. > > > > Thanks > > -Jez > > >
