That's better for me. Thanks ...

Ton.

  ----- Original Message ----- 
  From: Mike 
  To: [email protected] 
  Sent: Thursday, March 04, 2010 12:56 AM
  Subject: [amibroker] Re: Empirical Mode Decomposition


    
  John,

  If in fact Peak is supposed to retain the value of the previous Peak when not 
a new Peak (as opposed to zero shown in my previous post) and similarly for 
Valley, then my earlier post would need to be modified to the following (also 
corrected to no longer use the AmiBroker keyword Peak as a variable name)

  BP1 = Ref( BP, -1 );
  BP2 = Ref( BP, -2 );

  NewPeak = ( BP1 > BP AND BP1 > BP2 );
  Peaks = IIF( NewPeak, BP1, ValueWhen( NewPeak, BP1 ) );
  NewValley = ( BP1 < BP AND BP1 < BP2 );
  Valleys = IIF( NewValley, BP1, ValueWhen( NewValley, BP1 ) );

  AvgPeak = MA( Peaks, 50 );
  FracAvgPeak = Fraction * AvgPeak;
  AvgValley = MA( Valleys, 50 );
  FracAvgValley = Fraction * AvgValley;

  Mike

  --- In [email protected], "bbands" <bba...@...> wrote:
  >
  > --- In [email protected], "Ton Sieverding" <ton.sieverding@> wrote:
  > >
  > > Hi John. It's not that I cannot translate lines 29 thru 36 in AFL. My 
problem is that I do not understand the code :
  > > 
  > > 29. if BP[1] > BP and BP[1] > BP[2] then 
  > > 30. Peak = BP[1]
  > > 31. else if BP[1] < BP and BP[1] < BP[2] then 
  > > 32. Valley = BP[1] ;
  > > 
  > > What's the difference between Peak and Valley in the above code ? For me 
they always have the same value because whatever happens this value is BP[1] ...
  > > 
  > > BTW BP is an array and AFL handles this with the double if.( Iff( 
BP<Ref(BP,-1) etc. ) ...
  > Ton,
  > 
  > First, I think the John Ehlers' work in the article is quite elegant and 
very interesting. 
  > 
  > As I grok it: 
  > 
  > Peaks: If the last period is greater than the current period and the prior 
period then peak = last period else peak equals the prior value of peak.
  > 
  > c
  > c c
  > 
  > Valleys: If the last period is less than the current period and the prior 
period then valley = last period else valley equals the prior value of valley.
  > 
  > c c
  > c
  > 
  > So peak and valley always contains the value to the most recent high point 
and low point, where a high point is a point surrounded by lower points and a 
low point is a point surrounded by higher points.
  > 
  > I have done a lot of work on these ideas, which I call hips and lops and 
Wheeler called circled highs and lows. The big difference here being that 
closes are used instead of highs and lows.
  > 
  > You can see hips and lops in action on our forex site, www.BBForex.com.
  > 
  > So this neatly combines several area of interest for me, hips and lops and 
bands.
  > 
  > Thanks for having a look at it,
  > 
  > John Bollinger
  >



  

Reply via email to