Hi Steve,
Thanks for the plots and good advice on the electrolytics. I have seen
that problem on vintage BC equipment often.
I have excessive distortion on the HiZ output along with assym mod
indications not seen on the actual RF envelope viewed directly off TX
output. I should have no trouble solving with the print.
Thanks again,
Larry W3LW
At 09:44 PM 1/16/03 -0500, you wrote:
Larry wrote:
> I have a Harris Model AM-80 modulation monitor that I need a copy of the
> book. Does anyone have one I could photocopy?
>
> It is giving me a few problems and nothing is labeled inside.
I was just working on an AM80 about a month ago at work. Based on that
experience I recommend that you replace all the electrolytic caps before
bothering with anything else. I'll send you a scan of the schematic in a few
minutes...
73 Steve WD8DAS
[EMAIL PROTECTED]
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed. To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html ---
_______________________________________________
AMRadio mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/amradio
