Mike - The HV caps should be available though Mouser, www.mouser.com....They are usually very reliable and inexpensive....and no minimum orders. I can find the 125mfd/450v ones locally here so I'm sure you can find them around you, or through Mouser. If it's impossible to find 125 mfd's (which I doubt...they can be found), then you can put two, say 65's or 75 mfd, in series to replace each 125mfd's. 73, Larry KC8JX --- MIke Wells <[EMAIL PROTECTED]> wrote: > I have changed the bias supply caps but didn't mess with the LV multisection > cap in the can and didn't have any replacements for the high voltage caps. > The cathode bypass caps are easy to find so I always start with them. I am > at some what of a loss as to where a person can find replacements for caps > in the 300 working voltages and on up? Is there a big supply out there? > Particularly like the 150mfd 450wv high voltage caps, I don't know where to > find them so I may pick some stuff up at a swap meet but they are probably > as bad as what is in the rig. Where is the best source? > > Mike W0FD
===== May your days be full of sunshine and good thoughts fill your head. From: Larry Knapp, KC8JX, St. Joseph, Mi 49085 Best 73's __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/
