FOR SALE 3 Eimac ceramic chimneys SK-606. These fit the 4X150A, 4CX250 and 4CX350. $15 for all 3.
Command receiver parts set. No tag. Bare aluminum finish. Covers 190kc-550kc. Tube cover missing. Ham-modified for use as Q-5er. Dyno connector and rear connector have been "sealed over" with some sort of goop. Probably restorable but probably not worth the effort. $10 Instructograph. This is the only one of these I have ever seen that worked. Both motor and oscillator seem to be working as designed. It has 10 Continental code paper tapes with it numbered 1 through 10--and the tapes do actually play. But the motor speed control is poor. Looks good too. Oscillator can be used separately for code practice. Binding posts for key and hi-z phones (not included). $50 3 old dials. All of these are dirty but should clean up to be excellent. One is a National Velvet Vernier that looks just like the SW-3 dial except that the knob is different. Also the small metal dome that is supposed to be in the center of the dial is missing. The second one is the nicest dial. It is the same 4" diameter as the National dial but has no brand name. It is entirely round with no deviations. Complete. The third dial is an older style, also 4" diameter but with a peak and bottom to it like the National dial. It also has a large hump in the middle. No brand name but says "Patented 1922" on back. Nice dial. All dials work and are quite useable or projects or restoration. $39/all 3 including mailing. HP 10355A Oscilloscope Bezel Adapter for HP 5" 'scope. The mounting holes are 7" diagonally. New, old stock in original packaging $5 NOSB Bendix Microwave Devices Inc. directional coupler model 518.011. 20 watts. BNC in and out. With connector kit for connecting refl/incident meter. $19 GE Model 4KY8A3 antenna matching unit for connecting 2 receivers to one antenna. Uses 2 12AT7 and 1 6BH6 which are all missing. Requires external power supply. This is a 19 inch rackmount occupying 4 inches of rack space. In nice shape. Probably from GE Progress Line or later installation. $10 Box of coils. Most of these are wound but I am selling the box thinking that the forms are more useful than the coils themselves. But you be the judge. There are 16 coils in all. 2 marked "Shortwave and Television Laboratory Octocoil" 1.5 inch diameter, 4-pin types. 2 are smaller 5-pin plug-in coils, one of these has a "pull ring" on top. 3 coils are Millen 45004 1 inch diameter, 4-pin coils. 1 odd-ball small 4 pin plug-in coil with socket. The rest are factory-wound coils on phenolic (I think) forms. These may have been removed from radios but they look brand new. They seem to use small L-brackets to mount to the chassis and solder connections. Two of these are 1.25 inch with 2 coils wound inside the form and one wound outside the form. 2 more of these are 1.5 inch diameter and the last 4 are 1-1/8 inch diameter. $30/16 coils including mailing. 2 NOS 2E26 Tubes. In original Westinghouse boxes. $4 each. Eico 722 "Self-Powered VFO" original manual. Very good or excellent shape. Dated 1962. $11 PPD Thanks for looking. 73, Don Merz, N3RHT The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorized. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator.(A)
