Jim,
Check out the following link:
http://www.belden-wire.com/
Go to Catalog, then "technical info", and punch in RG-6. There is a whole
lot of variations to RG-6. That said, it looks like 300 volts RMS is the
rating.
The place I work at uses RG-8 (not the foam stuff) for transporting high
voltage DC at 40,000 volts without problems. For sure the DC rating (not
specified) is higher than the AC RMS rating. That stuff is really tough to
punch through.
Regards,
Jim
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jim Wilhite
Sent: Saturday, July 17, 2004 5:14 PM
To: [email protected]
Subject: [AMRadio] RG 6
Does anyone have the voltage specification on RG6 coax? Does anyone know if
it is even specified?
73 Jim
de W5JO
______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004
