Great Tom. I worked a guy yesterday using a great sounding B&W 5100B out of Gray Court, SC - it was W4IT, Steve. Sent him a QSL card too.
On 16 Oct 2004 at 17:35, Tom Elmore wrote: > I finally had time this week to install the Stancor replacement modulation > transformer for my B&W 5100B and have found a set of taps that work on both > the primary and secondary windings. I can make full carrier output of at > least 100 watts but the modulation is only making about 85 to 90 % before it > starts to flatten out on the scope and distort. I have changed both the > modulator and final set of tubes and still get about the same percentage of > modulation. I was hoping to make at least 100% easily. Someone mentioned > recently that this was a characteristic of this unit and I wonder if it's > power supply limitations or some other factors. > > Thank You > Tom Elmore KA1NVZ > Anchorage, Alaska > > ______________________________________________________________ > AMRadio mailing list > Home: http://mailman.qth.net/mailman/listinfo/amradio > Help: http://mailman.qth.net/mmfaq.html > Post: mailto:[email protected]
