Hi Brian,

Your may want to consider what Hy-Gain (before MFJ) did. Run a chuck of cable at a 45 down the back side of your pipe into an earth anchor or other suitable support. The one I have works great.

73,
Jack
WA9NQW

On May 11, 2006, at 1:58 PM, Rick Brashear wrote:

My personal opinion is it will not withstand the first half of the lift. I had a similar situation and it did not work. You might consider using "drill stem".

Rick

Brian Sherrod wrote:

Sort of off topic, however I know there are some really smart guys on here
that may know the answer to this;

I've got a Rohn bx48 (48' light duty tower) that I would like to be able to
fold over/up for any maintenance.  It will have a Ham IV rotor/3 el.
tri-bander and dipole pulley at the top. I plan to mount in the concrete base a 25' steel pipe 4 1/2" diameter with 1/4" walls directly behind the tower for raising and lowering to tower. The pipe will be 20 feet above the ground level with 5 feet embedded in the concrete tower substructure. It will have a pulley at the top of the pipe and a hand crank at about 4 feet, with steel cable attached to the tower at the 20 foot level. Question is;
will 1/4" walled 4 1/2" steel pipe be able to withstand the foot lbs.
required to raise and lower this tower below the 45 degree mark without buckling? Seems I can not find any pipe this size with larger wall diameter around here. I could guy the pipe in the opposite direction if needed...

Any mechanical engineers out there know the answer??

Thanks,

Brian / w5ami
______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb



______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb


Reply via email to