If you find a good source you could start a business...maybe call it "The Nut Case"! hi
Tom K3TVC ----- Original Message ----- From: "John E. Coleman (ARS WA5BXO)" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; "'Discussion of AM Radio'" <[email protected]> Sent: Friday, August 18, 2006 2:29 PM Subject: [AMRadio] Hardware for potentiometer > Ok so I found myself with out enough hardware. > > I have a 100K dual audio taper pot from Radio Shack and I lost the nut. It > is one for mounting in a 5/16 hole so I assume it is a 5/16 treaded sleeve > with a 1/4 inch shaft but I can't find any hardware for it. > > Now I could just go buy another pot with hardware but after looking I find > that I have other pots with no hardware and some of them are the same > sleeve. I have hardware for the bigger pots. I guess you might say the > standards. Searching Google comes up with no hardware except for at > Electronic Goldmine, where I bough a bunch that are to large. Who makes > this stuff, some far east company, and they secretly ship them to > Switchcraft and other manufactures of potentiometers. > > John, WA5BXO > > > > ______________________________________________________________ > AMRadio mailing list > Home: http://mailman.qth.net/mailman/listinfo/amradio > Help: http://mailman.qth.net/mmfaq.html > Post: mailto:[email protected] > AMfone Website: http://www.amfone.net > AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb >
