Thanks Joe, that should do the trick. The problem I have is I am using
a BC-614-E speech Amplifier with a PTT modification on it so all works
off the PTT switch on the microphone. It's been too many years since I
played the drums to think I could ever manipulate a foot switch and a
mic switch without getting messed up! :-) ....there was a day,
but it was a long time ago!
It's all irrelevant now anyway. I just got up from digging around
inside the monster and found I have a RF bypass capacitor in the RF deck
leaking oil and will have to pull the top off this old gal after all.
Why couldn't this happen on the "H" or "I" model so I could just pull a
deck out?
Thanks,
Rick
crawfish wrote:
Rick, what I did is take 120 vac , run one leg(the hot leg) through a BIG
footswitch to one side of the Dow-Key.........
______________________________________________________________
AMRadio mailing list
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Partner Website: http://www.amfone.net
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
