This week I had an idea on how to accomodate the larger-than-stock modulation transformer *inside* the cabinet of my Gates BC-1T...
I made a platform to support it above the other transformers and caps on the floor of the transmitter. It is made of a 15" square of 3/4" plywood with four legs of 1/2" iron pipe threaded into floor flanges. I had to unlace the HV wiring to reach the connections, but all the wires dressed nicely and the rigs is running fine. The legs are spaced 12" apart on one axis and 9" apart on the other to fall between the parts on the bottom of the rig. Steve WD8DAS ************************************** AOL now offers free email to everyone. Find out more about what's free from AOL at http://www.aol.com. ______________________________________________________________ AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
