Geoff/W5OMR writes:
Does anyone have any 4-65's?
I think that'd be a neat little ~100w rig to build up.. a single 4-65
tetrode, modulated by a pair.
Sounds like a neat combination. You oughta be able to get about 150W carrier
out of one, run less conservatively (not that anyone will hear the
difference, of course).
Someday I am going to build a rig with a pair of 'em modulated by 811s, when
I get a round tuit. Already have the HV PS/modulator deck built, just have
to do up the RF deck, which will also contain the VFO (a T-195 PTO I've been
saving for this project), and RF and AF driver circuits. I hope to run the
pair at 500W input (2500V @ 200 mA), or close to it, depending on the plate
efficiency I'm able to achieve.
-SNIP-
6.3v @ 3.5a? Got those transformers, too.
Actually, they want 6.0V, so drop the voltage to the primary or run
resistors in the primary or secondary circuits of the fil xfmr. One trick is
to use appropriate lengths of undersized wire to the filaments (whatever
length is necessary to drop the filament voltage at the socket to 6.0 V).
GL,
-Larry/NE1S
______________________________________________________________
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Partner Website: http://www.amfone.net
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [EMAIL PROTECTED] with
the word unsubscribe in the message body.
