Try http://www.cnjradio.cn/radio.net/tubedb/read.cgi?tube=15E
Ought to make a neat AM radio transmitter. :-) 73 de Bill, ab6mt [EMAIL PROTECTED] ----- Original Message ----- From: "Barrie Smith" <[EMAIL PROTECTED]> To: "Discussion of AM Radio" <[email protected]> Sent: Sunday, April 15, 2007 4:42 PM Subject: [AMRadio] Eimac 15E Anyone know where I can get a complete spec sheet for the Eimac 15E? It's a physically small, glass triode, used (I'm told) as an output tube in aircraft radar. Evidently, a long time age. All connections are pins. Two out the bottom are filament, one out the top is the grid, and the plate comes out the side. Certainly a different configuration. I have some specs. The max plate voltage is 2000 volts. The filament voltage is 5.6 volts, which I suspect, since, if it's a radar tube, designed for pulse-service, Eimac often used a higher-than-normal voltage for that use. Anyway, I've got an urge to build something and that tube is so (dare I say) cute that I'd like to build a semi-QRP CW rig around it. Barrie, W7ALW, DN36au, QRV 6M, 432 & 1296 EME ______________________________________________________________ AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body. ______________________________________________________________ AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
