On 5/7/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
You can see how I interfaced my DDS VFO (about 9 volts peak-to-peak output) to the oscillator section of the BC-1T on my website at http://www.wd8das.net/Gates/GatesOsc.jpg The stock crystal switch had additional positions available so I just changed where the stop tab was and made it a three-position switch: F1, F2, and VFO. Put a BNC on the bottom of the osc/buffer module for the VFO signal to enter, and it works great. I've not had any trouble with the RF output of the buffer running in the same harness as the power supply lines, but as Don points out it is pretty dumb that way and should probably be changed. But it works OK in mine as-is, so far.
Thanks Steve. That info will be helpful, I'm sure. I just printed the manual so now I can at least have something to look at until the 1T gets here. The Flex can output as little as 100mw, however I'm not sure how stable the output is at that level... 73 Brian ______________________________________________________________ AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
