I've been using my 160 M inverted vee on 18 MHz. Loads up fine and seems to work great. Have worked lots of DX.
Pete, wa2cwa On Wed, 9 May 2007 07:53:50 -0400 "James M. Walker" <[EMAIL PROTECTED]> writes: > Hey Paul, > Your basic BC-610 will get there either with the proper crystal, or > even the > tuning unit TU-54. I am reasonably sure the RF Plate coil C-449B > would > handle > it as well. It is recommended though that you have checked the > neutralizing > before > operation, but it could be done. > > Same with the Millen exciter/modulator/amplifier combo, with xtal > control. > > As for the dipole, how about a loop, not overly large, and might get > better > coverage in a single region. FWIW > > Jim > WB2FCN > > ----- Original Message ----- > From: "VJB" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Wednesday, May 09, 2007 6:58 AM > Subject: [AMRadio] 18.150 ? > > > >I would like to cut a dipole for 18.150 and see what > > kind of AM activity we could stir up. The band is > > lightly loaded most of the time, so there's room for > > the occasional chat. > > > > Anyone else thought of that ? > > > > Paul/VJB ______________________________________________________________ AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
