Of course Larry - you are right. Why didn't I think of that?!! We should settle for a ham allocation at 465 kHz instead then!
Come to think of it they should just give us all of 465 to 510 kHz for AM ONLY!! And have 500 kHz reserved as an emergency callling channel for CW only! Yeah that'll suit us! > Can't be done this way if the BCB receiver IF is 455 Kc, as it commonly > is. > In this case the LO would have to be running at 0 Kc! The way to do it > would > be to disable & bypass the front-end and couple the antenna directly to > the > 1st IF stage. > > As someone else had mentioned, problems would be likely with the 455Kc > signal bleeding into the 455 Kc IF stages of other radios not intended to > receive it. > > -Larry/NE1S > ____________________ ______________________________________________________________ AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
