Great idea Jim - and I also have FT243 crystals available for 
17m - they are on 6040 and 6050 kHz if anyone would 
enjoy working that band.

73 - Bry, AF4K

> Bill,
> 
> Also consider 6050 for use on 17m at 18150. I know this works on the Viking I 
> when the bandswitch is on 20 or 15m (don't recall which). The Viking I or II 
> has the advantage of a continuously tuned output pi-net whereas the Valiant 
> likes to stay closer to ham bands of that era.
> 
> 17m has been pretty active these days. Maybe we need to make a presence there 
> on AM....
> 
> Jim
> 
> ----- Original Message ----
> From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
> To: [email protected]
> Sent: Sunday, September 9, 2007 4:52:26 PM
> Subject: [AMRadio] Johnson Valiant Crystal Control Question
> 
> After all these years I should know this but the answer presently escapes me. 
> In order to operate a Valiant I transmitter on AM using crystals instead of 
> the VFO, what actual frequencies would the rocks for 75, 40, 20, 15 & 10 
> meters actually be cut for? 
> 
> Are they all fundamental frequencies or are some cut for the 2nd and 3rd 
> harmonics? I'd like to have some on hand to transmit on, for example, 3885, 
> 3880, 3875, 7290, 14286, etc. Any advice with specific examples would be 
> appreciated. Thanks & 73, Bill, w0ng
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:[email protected]
> To unsubscribe, send an email to [EMAIL PROTECTED] with
> the word unsubscribe in the message body.
> 
> 
> 
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:[email protected]
> To unsubscribe, send an email to [EMAIL PROTECTED] with
> the word unsubscribe in the message body.
> 


______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [EMAIL PROTECTED] with
the word unsubscribe in the message body.

Reply via email to