Rick Brashear wrote:
I ran it through a small capacitor before the grid of the 828 buffer. I
appreciate the info Jim and Geoff on the output of the 122. I thought it
should be plenty hot to do anything I wanted. I guess I'd better go back to
crystal control and not take on another project of repairing the vfo at this
time. It was just for a test anyway. I am supposed to get about 100 ma pa
grid current and I'm only able to muster up about 65 ma. However, I am
getting the full 250 - 275 watts of RF out. I just need to level it out a
bit.
Don't give up yet... put a probe on the output of the vfo and measure it
on your scope... make sure the VFO is working.
--
Driving your AM Rig without a scope,
is like driving your car at night, without headlights. (K4KYV)
--
73 = Best Regards,
-Geoff/W5OMR
______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [EMAIL PROTECTED] with
the word unsubscribe in the message body.
