Hello,
I have been trying to get this like new HT37 on the air for awhile.
The audio phasing modulator has been near impossible to properly ballance
espeially using the manual instructions.
So far have replaced a leaky low pf brown drop silver mica
that corrected some of the problem but still am not able to get a properly
phased output from the modulator.
The audio seems ok up up to the rf stage where it won't align. The carrier osc
is on freq ok but the carrier phasing adjustments do not work out.
Where would be a good location to apply a ballanced audio signal to bypass
most of the original circuit?.
Has anyone come up with an alignment procedure using modern test gear?
Thanks,
Bill,
KB3DKS/1
______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [EMAIL PROTECTED] with
the word unsubscribe in the message body.
