Thanks Jim. It doesn't have a number on it that I have found, so it may not be usable for my intentions.
Thanks for the tip... By the way, I still can't see my original post to this list since I switched to gmail. I could always see it before. I checked all the settings at mailman and it should be good to go. I probably have something wrong in my gmail account. Thanks, Rick >From the Belden site: RG-6/U Type 1532A 6.20 Belden 1/.040? CCS GIFPE DBII/90% AL PE .024 75 16.2 -55 to +80 300 The last number in that list is the voltage rating of Belden RG 6 U for burial type. So if you run a KW that means your voltage is near 265 volts. This is fine provided you have a good match. What I am saying is that not all RG 6 is as good quality so one must be careful. I have seen some RG 6 that I wouldn't put more than 25 watts into because of the construction. This is particularly true of foam filled. It melts at a lower temperature than PE. Usually the drop cable used by CATV people is much better. Jim/W5JO ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
