Good info Pete, I never noticed that part in the Service Manual when I was
installing several mods and cascaded filters. Gotta learn to read more I
guess.
You wouldnt happen to have a spare VF0-830 kicking around?
Carl
KM1H
----- Original Message -----
From: "Peter Markavage" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, February 09, 2008 3:09 PM
Subject: Re: [AMRadio] Re: AMRadio Digest, Vol 49, Issue 35
830 service manual shows the difference between the 830S and the 830M(AM
version). Additional simple board with several transistors, relay, and
some discrete components. Need a 6 KHz AM filter (the one from a TS-930
works fine). After wiring modification, "Wide CW" on the mode switch
becomes the AM position. Not hard to implement if you feel ambitious.
Pete, wa2cwa
On Sat, 9 Feb 2008 12:54:30 -0500 "jeremy-ca" <[EMAIL PROTECTED]>
writes:
I wish my TS-830's had AM. I use them to drive VHF transverters and
there
are often new contest points to be had on AM. It is a pain to have
to switch
in the Clegg Zeus.
End of gripe!
Carl
KM1H
______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [EMAIL PROTECTED] with
the word unsubscribe in the message body.
______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [EMAIL PROTECTED] with
the word unsubscribe in the message body.
