I think you have the SB-610 and SB-614 confused with the SB-620 Panadapter.
What you state is true of the SB-620. Bob Macklin K5MYJ Seattle, Wa, "Real Radios Glow in the Dark" ----- Original Message ----- From: "Jim Wilhite" <[EMAIL PROTECTED]> To: "Discussion of AM Radio in the Amateur Service" <[email protected]> Sent: Monday, February 11, 2008 3:49 PM Subject: Re: [AMRadio] Using Heath SB 610 Monitor Scope to monitormodulationonAM transmitter > To anyone considering an SB 610 or 614, keep in mind they must be > constructed to match the IF frequency of the receiver to which they will > be interfaced. > > Some of them were built to work with the Heath receivers with the 3 meg > IF and those that were built for 455 Kc. had the coils that would do so. > > If you find one for with the 3 Kc IF coils, it won't work properly with > a NC 300 or NC 183D for example. Heath packaged the coils for both with > the units and the builder chose which he wanted. I doubt you will > receive the coils that were not used during construction. Check them > out before you find you have something that won't work with your > receiver. > > Jim/W5JO > > ______________________________________________________________ > Our Main Website: http://www.amfone.net > AMRadio mailing list > List Rules (must read!): http://w5ami.net/amradiofaq.html > List Home: http://mailman.qth.net/mailman/listinfo/amradio > Help: http://mailman.qth.net/mmfaq.html > Post: mailto:[email protected] > To unsubscribe, send an email to [EMAIL PROTECTED] with > the word unsubscribe in the message body. > ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
