A friend recently posed this question to me. Since there are builders here who know far more about tank coils than me, I, yield to the experts.
Mike Duke, K5XU ----- Original Message ----- From: "Howard Traxler" <[EMAIL PROTECTED]> Sent: Monday, March 17, 2008 7:09 AM Subject: determining frequency of a transmitter? recently I purchased a transmitter--home brew. There is no designation of what frequency band it operates. It is a plate modulated 807, crystal control (oscillator tube missing). The output tank has some rather small tuning capacitors and a air wound coil about an inch in diameter and maybe eight turns at about half inch spacing with a tap a couple turns from one end. Any ideas? Thanks 73, de Howard, WA9RYF -- No virus found in this incoming message. Checked by AVG. Version: 7.5.519 / Virus Database: 269.21.7/1331 - Release Date: 3/16/2008 10:34 AM ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
