I am fixing an old radio for a friend of mine. It is a Firestone Air Chief S-7398-8
Picture found on the internet here http://radioattic.com/item_sold.php?radio=0002474X Replaced the 5Y3 rectifier and repaired the speaker. Believe it or not, the flexible wire from the cone connection of the voice coil was open. Only the string was left in the middle. I was able to tack a piece of solder wick to the top side of the voice coil wire and made a small hole in the cone then soldered the other end to the frame terminal. I then glued the small hole on the cone. I was afraid that something in the output XFMR or the hum bucker in the magnet assemble would be shorted that would have caused this but all check OK. The radio appears to be working now but there is a 4 pin connector on the chassis which I have determined to be for an antenna coil assembly connection. I believe there is supposed to be some type of wave magnet wound on the missing back. It is probably a multi tap or multi winding assembly with 4 wires that plug into the radio chassis. I do not know the specifications on this assembly as to whether it is part of some resonated RF circuit or just a loop or a few loops. Any info on the antenna coil assembles or schematic would be appreciated. Maybe I can manufacture something. TNX, 73, John, WA5BXO ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
