Hello,
Would anyone happen to have one of the Empire/Singer NF-105 EMI units?
I recently picked up the T-A plug in tuning unit, ( 150 kc to 30 mhz
in 6 bands with a 455 kc and 1.6 mhz IF),
with the intention of using it for a SDR front end.
The unit was simple to get operating needing only 6.3 heater and
somewhere around 150 vdc.
It works very well and has a gain control voltage input that would be
easy to use for AGC. Using a bias of approx.
minus 3 volts now for manual control.
What I am looking for is the proper B+ voltage so a small supply can
be built. The gain control bias would be good to know as well but think
I have that figured out.
So, a copy of the T-A Schematic/manual would be greatly appreciated.
Even just the voltages would help.
Would gladly pay for any copy and postage.
This tuning unit looks like a real nice candidate for SDR/Soft Rock,
etc use and has a very usable IF bandwidth
just using a simple diode detector into an amplifier. Of course I have
to use an input attenuator for good overload prevention. It was even
able to pull out even the difficult AM signals through the SSB
Pensylvania QSO Party
Sarurday.
Thanks in advance,
Bill,
KB3DKS
______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
Searchable Archives: http://www.mail-archive.com/[email protected]/
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [EMAIL PROTECTED] with
the word unsubscribe in the message body.
