Just like any other mode, it depends (band conditions, QRM, QRN, etc.)? I use my DX-60 barefoot on a compromise antenna and have made a lot of successful contacts on 75 and 40m AM.? Can't say about 20m.... 73 de John, K5SEE
"When CW is no longer required, it will be a necessity." de K5SEE -----Original Message----- From: Bob Macklin <[EMAIL PROTECTED]> To: AM Radio <[email protected]> Sent: Sun, 23 Nov 2008 12:38 pm Subject: [AMRadio] Low Power AM? Next question. ? Many of us have low powered AM transmitters like the small Heath DX series with some form of screen modulation. ? These transmitters previously did OK on 40M and up. 15M and 10M don't really require high power. ? But what about 20M. It seems to me that to play on 20M a GOOD linear is required for just about any small or medium powered transmitter. ? Bob Macklin K5MYJ Kent (Seattle), Wa, "Real Radios Glow in the Dark" ? ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body. ________________________________________________________________________ Sent from a personalized AOL(R) My eAddress. Create your own FREE email address from scratch (go to http://domains.aol.com), not just the part before the @.
______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
