Al What is the diameter of the insulator you need? I have one that looks just like the good one for the back modulator tube. It's in the Bauer 707 I'm rebuilding, and I will not need it in the final "product". It was a feed through to the built in dummy load. The one I have is 1.125 dia. at the base with a slight draft angle to the top, and about .75 deep (panel to end of ceramic) looks to be 10-32 threaded rod.
Bill AD5OL ----- Original Message ---- From: Al Waller <[EMAIL PROTECTED]> To: [email protected] Sent: Tuesday, November 25, 2008 5:28:28 PM Subject: [AMRadio] Collins 20V-2 I need 2 parts to complete my 20v-2 electrically. A safety interlock switch for the rear left door and the ceramic insulator that brings the HV to one of the modulator tubes. Here are pix of the parts I need. http://www.dxham.com/CollinsV20-2/2008-11-23/008.JPG http://www.dxham.com/CollinsV20-2/2008-11-24/003.JPG 73, Al ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body. ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
