Hi Robert,
 
We have several of those wireless towers and monopoles around here, as well  
Those side wires are safety cables that climbers can clip on to with 
fall-arresting lanyards and harnesses, they are not radiators.  
Anyway, the folded unipole is a worthwhile antenna to try.  I have had 
excellent results with an inverted L running up the side of my 80' tower and 
the "horizontal" portion sloping out to a tree.  The "L' perhaps looks more 
like a vee with one short leg.  Total length is about 135 ft.  I use a coil and 
capacitor parallel network at the base of the tower feeding the end of the 
antenna wire then coax back to the shack.  As always, a good radial system 
really helps.
 
73,  Jack, W9GT

--- On Mon, 1/12/09, [email protected] <[email protected]> wrote:

From: [email protected] <[email protected]>
Subject: Re: [AMRadio] 160 meter antenna
To: [email protected], "Discussion of AM Radio in the Amateur Service" 
<[email protected]>
Date: Monday, January 12, 2009, 7:23 AM




Neal. Thanks for the link on building the Unipole. I had worked for Sprint for 
some time and I noticed they were using that same concept on many of their 
towers. The link was exceptionally helpful 
-------------- Original message from neal Newman <[email protected]>: 
-------------- 


> Jim you only need 50 feet of verticle space. 
> why not just build yourself a Folded Unipole antenna if you Dont know how. 
> Ask. its really easy. Just Run 3 lengths of #12 wire or if you have it #6 
> wire. short them up at around the 50 foot point and use 1" PVC 
> Tubing as Insulators with clamps Down the side of the Tower. 
> at the bottom Each wire is isolated with PVC from the Tower. 
> BTW Each wire should be about 12" or more off the tower. then Tie all 3 wires 
> together with a ring of #12 and take that as the Lead to the antenna tuner. 
> Run at Least 4 ground radials 50 feet long If you can get 
> the space make them 120 feet... 
> and you will have a Killer 160 antenna. if not make an inverted L Run a wire 
> thats 130 feet long. as far vertically as 
> you can then run the rest out horizontally... again you need at least 4 
> ground radials.... the unipole is what we use for 
> Broadcast stations when we are tight for height or space on a grounded Tower. 
> 
> Neal-KA2CAF 
> CE- WTTM/WHWH/WJDM/WIBG/WFYL 
> 
> 
> --- On Sun, 1/11/09, Jim Miller WB5OXQ in Waco wrote: 
> 
> > From: Jim Miller WB5OXQ in Waco 
> > Subject: [AMRadio] 160 meter antenna 
> > To: "Discussion of AM Radio in the Amateur Service" 
> > Date: Sunday, January 11, 2009, 11:28 PM 
> > I always wanted to try am on 160 but like most do not have 
> > enough room for a full size antenna, so, 
> > I am considering building a 160 meter antenna at our 
> > clubhouse because there is a 80' tower there and over an 
> > acre of land to spread out a 1/2 wave dipole. Question is; 
> > 1 Is a 1/2 wave wire dipole the best antenna for the band 
> > considering there is room for it. 
> > 2 Is 80' high enough for the center of the inverted V? 
> > 3 How high do the ends need to be off of the ground? 
> > 4 Should I feed it with coax or ladder line to the 10' 
> > level (or other) then a balun to coax to the tuner (coax is 
> > the only acceptable line into the shack)? The shack is a 
> > metal building 30X60' and directly below the tower. 
> > There is no way to get ladder line to the operating position 
> > since all cables have to run through a 3" conduit for 
> > at least 30'. 
> > 
> > The tower is a free standing commercial tower made of 4 
> > 20' sections bolted together with a 2 meter and a 440mhz 
> > antenna at the top, all ham antennas. 
> > 
> > Thanks for any advice. Jim 
> > wb5oxq______________________________________________________________ 
> > Our Main Website: http://www.amfone.net 
> > AMRadio mailing list 
> > Searchable Archives: 
> > http://www.mail-archive.com/[email protected]/ 
> > List Rules (must read!): http://w5ami.net/amradiofaq.html 
> > List Home: http://mailman.qth.net/mailman/listinfo/amradio 
> > Help: http://mailman.qth.net/mmfaq.html 
> > Post: mailto:[email protected] 
> > To unsubscribe, send an email to 
> > [email protected] with 
> > the word unsubscribe in the message body. 
> 
> 
> 
> ______________________________________________________________ 
> Our Main Website: http://www.amfone.net 
> AMRadio mailing list 
> Searchable Archives: http://www.mail-archive.com/[email protected]/ 
> List Rules (must read!): http://w5ami.net/amradiofaq.html 
> List Home: http://mailman.qth.net/mailman/listinfo/amradio 
> Help: http://mailman.qth.net/mmfaq.html 
> Post: mailto:[email protected] 
> To unsubscribe, send an email to [email protected] with 
> the word unsubscribe in the message body. 
> ______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
Searchable Archives: http://www.mail-archive.com/[email protected]/
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [email protected] with
the word unsubscribe in the message body.
______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
Searchable Archives: http://www.mail-archive.com/[email protected]/
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [email protected] with
the word unsubscribe in the message body.

Reply via email to