Well.......it was my intent to do so. I pulled them out, set them to the side and asked the station's operations manager to tell the people he was having move the carcass out to leave them so I could pick them up on my next trip. They didn't.
I also told him to tell the painting and repair guy who had started caulking heavily around the old cracked Plexiglas feed line exit panel to stop because I was going to replace it with a new piece of 1/2" Lexan. He didn't do that either. I had to spend half a day digging 2 or 3 tubes of caulk out so I could put in the new panel. Some people need to have their Push to Listen Switch exercised more than others. Bill AD5OL ----- Original Message ---- From: D. Chester <[email protected]> To: [email protected] Sent: Thursday, February 12, 2009 11:18:14 AM Subject: Re: [AMRadio] 1 kw broadcast transmitter available >> I hope someone salvaged the modulation and power supply iron and rf tank components before the rest of the rig went to the scrap heap. Don k4kyv _______________________________________________________________ ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: [email protected] To unsubscribe, send an email to [email protected] with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
