Thanks to all for their replies to my tuning query. I think I tend to agree with the majority that RF is getting into the Palstar or somewhere in the shack and causing the issue. I'm doubting that it's antenna components, since it ALSO does it on the CanTenna Dummy Load! For the most part I'm running 1/2 inch hardline, or new 213 to the antennas, which have all been swept with the TDR, so I'm not thinking feed either....
Time to take a hard look at the Palstar, and do some RF field strength measurements in the shack! Thanks again to all for the suggestions!!! Regards, Mike - N3ESQ www.n3eaq.net ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: [email protected] To unsubscribe, send an email to [email protected] with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
