Remember that attachments are stripped!

No one got the schematic.

Bob - N0DGN

WØTDH wrote:
> EF Johnson Messenger II on 10 Mtrs - Project
> Some progress. Xmtr now puts out about 6 watts on 29.100kc. Tweaked tank & 
> by-passed R-48.
> Dave - WB1EAD sent me a xtal for 29.100kc  ( xmit ).
>
> Rcvr another story. Still fiddling with the rcvr VFO. ( Continuous rcve 
> function )
> Schematic attached if anyone has an idea of how to bring rcve up to 29.000 / 
> 29.100kc area.
>
> Dale - W4OP states xtals are third harmonic. Rcve xtals are less 455kc. Will 
> order a few from Brian. 
>
> Using xtals on rcve, should just be a matter of tweaking..... I hope. 
> Still would like to use the continuous rcve function though.  
> L-113 ( shown L-13 in schematic ), does adjust as does the trimmer C-111 
> attached to it, but not nearly enough. 
> Add / subtract capacitance? 
> There are two small disk caps with one side of their leads twisted together ( 
> gimmic? ) in the VFO area.
>
> Any help would great.
> 73,
> Tom
> Thomas F Fischel - WØTDH
> 8274 Cullowhee Mountain Road
> Cullowhee, NC  28723
>   

______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
Searchable Archives: http://www.mail-archive.com/[email protected]/
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Post: [email protected]
To unsubscribe, send an email to [email protected] with
the word unsubscribe in the message body.

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to