I have an HRO-50 that is about to drive me nuts. trying to align it, everything seems good except the osc freq. so I just have been trying to bring it into range by listening to the osc freq on another rx. It completly lacks the range of adjustment needed. now the question, the manual, pg 22 states that the osc must be above the rf freq, IE low end of this coil is 1.7 so osc should be at 2.145. the manual then states that one must be sure the osc is above by checking 910KC BELOW the rx freq that is tuned in. I don't think so!!! if the rx is tuned to 1.7 the image will be at 2.610 not lower. what is going on? Is the manual wrong and they are just talking about the VLF coils? clearly those coils that are VLF must have the osc above as I do not think anyone has come up with a minus freq osc. Now I have adjusted everything,per the manual, the brass slug, the caps. even have had the T4 open and examined closely. Bernie
______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: [email protected] To unsubscribe, send an email to [email protected] with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
