Ah-ha!!! So that's why mine does that!!! (Replaced the mic on my 460.) Ed, VA3ES -----------------------------------------------------------------------
Greg Mijal wrote: One thing to look out for when changing mics on the 410/460 is that you have to use a microphone with a second set of contacts to disconnect the mic element from the circuit when going to receive and vice versa. If you don't you will get a loud bang out of the speaker when you release the PTT switch. It does that because the transmitter mic audio amp is also used in the receiver audio and the bang is there while the relay is moving. Learned this one the hard way. ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: [email protected] To unsubscribe, send an email to [email protected] with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
