Hi All, I am trying to get my ICom 820H working under CAT.
I have an OPC-478UC It is USB to single line CI-V required by the ICom 820H. I have shifted it's output to the tip from the sleeve on the 1/8" phone plug. Under System / Device hardware the OPC 478 shows up as com 3. The radio does not control. I have set the address to 60h from 42h in the radio and the baud rate to 9600 on both radio and program. I get the E/A Fehler-32 warning when I try to store the com port values. The OPC 478UC does work my ICom D800 and when connected to the 820H will return a Com 3 when com port is selected. If I unplug the cord to the 820H it tells me no radio is connected. Any help on this one would be appreciated. Art, KC6UQH _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
