Error.. FT-736r CAT DIN has 4 connections not the 2 noted below. GND, Signal In, 13V , Signal Out See schematic and
http://www.mindspring.com/~n2wwd/html/body_doppler_compensation.html > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Alan VE4YZ > Sent: October 26, 2009 9:56 PM > To: 'Jim Bennett' > Cc: 'Amsat-BB' > Subject: [amsat-bb] Re: SatPC32, Yaesu FT-736, and KCT > > Hi Jim, SATPC32 will run the FT736r directly using a serial > port or a USB/Serial adapter to the 6 pin DIN CAT port on the > radio. However, the cable must include a TTL/Serial > converter. Page 13 of my FT736r manual using GND, S.IN only > If you are already running directly from PC to Radio with the > proper cable you need to confirm the baud rate on SATPC32 is > 4800 as that is the only rate the 736r understands. > > When I used to run WISP for GO-32, it did NOT run the radio > or rotators. It just ran the TNC. SatPC32 did the radio and > rotator controller. > > I made a TTL/Serial adapter and mounted it inside the DB9 > connector. See > here: > > http://picasaweb.google.com/ve4yz.alan/RS232TTL# > > > Hope this helps > > 73, Alan VE4YZ > EN19kv > AMSAT LM 2352 > http://www.wincube.ca > > > > > > -----Original Message----- > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Jim Bennett > > Sent: October 26, 2009 9:09 PM > > To: [email protected] > > Subject: [amsat-bb] SatPC32, Yaesu FT-736, and KCT > > > > Has anyone got this configuration working? My current setup is: > > > > > > > > Yaesu FT-736, WISP, Kansas City Tracker/Tuner with Yaesu 5400 > > rotor control box. > > > > > > > > I have try to use Satpc32 with the KCT and it will interface > > with the rotor control, but will not tune the radio. > > > > > > > > Do I need a separate cable for the data link? Or will > > Satpc32 interface with KTC and tune thru the KTC board? > > > > > > > > Thanks for any info. > > > > > > > > Jim > > > > KE4KOL > > > > > > > > _______________________________________________ > > Sent via [email protected]. Opinions expressed are those of > > the author. > > Not an AMSAT-NA member? Join now to support the amateur > > satellite program! > > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > > > > _______________________________________________ > Sent via [email protected]. Opinions expressed are those of > the author. > Not an AMSAT-NA member? Join now to support the amateur > satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
