Hi, amsat-bb CQ any satellite link budget expert !
I'm trying to do a calculation on my own based upon published specs for the NASA MRO Ka-band experiment, but am getting some unexpected results for a Ka-band simplex link with Temp=3000K (hypothetical), operating with a Signal to Noise ratio (unitless) figure of 1.171 (representing 4.5 dB eb/no with a data rate of 1 Gbps and a bandwidth of 2.4x10^9 Hz) Question : is 1 gbps not 1x10^9 bps ? Question : if both antennas are 3m parabolic (both are the same type) with 56.4 dBi boresight gain, what would you think the furthest distance the link can perform with SNR of 1.171. I have actually used a padding of 3 dB Eb/No in my link budget, so am not worried about any further signal loss at first (ok, I should be ..) For the exercise, I am choosing a 10 Watt estimated output on an arbitrary basis. So: P_t = 10W G_t = 56.4 dBi = G_r , can we assume the same gain for TX and RX on a parabolic dish ? T = 3000K at receiver SNR = 1.171 required f=32.2 GHz B = 2.4E9 Hz, (bpsk, ldpc code 0.5) DR = 1E9 bps So, I am puzzled why this link budget says the range with these parameters is equal to 4.644 x 10^9 Km -- that seems to be a long distance ! What am I not able to conceptualize. BTW, I know if I send this out, the answer will come to me soon thereafter, but for education, I would like to know where the problem in my understanding lies ! Samudra N3RDX _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
