Hello sathams.
I've tested and found out that CTSS tone in a TS2000 in sat-mode can't by set. Neither via a satprogram. But how to configure the TS2000 to work SO67 Set sat mode off Set split off Set the main VFO for uplink 145.875MHz Set to FMN mode Push the CTSS button and CT must appear in de main VFO display. Push sequelly FUNC and CTSS/SEL button and select 233.6kHz by turning the MULTI/CH knob Push sequelly FUNC and CTSS/SEL button again to enter the CTSS tone. Push the SUB button. Push the CTRL button so the CTRL-indicator appear on the VFO B display. Select the 70cm-band by using the + and - buttons. Set to FMN mode Press the 1MHz button en use the MULTI/CH knob to adjust. Finaly use the tunerknob to finetune the frequentie 435.345MHz. Make sure the step is 5kHz. Turn down the MAIN AF. Turn up the SUB AF. Listen with a headset so there is no sing arround when you transmit. Use less power as possible. ( EU?) Cu on sats. 73 Dan ON5UE _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
