Same here. Using 100W and X-quad. And no pass trough. Or the pilote tone is changed or the uplink frequentie or the squelch on the input is set too high. 73 de Dan ON5UE
-----Oorspronkelijk bericht----- Van: [email protected] [mailto:[email protected]] Namens PE0SAT Verzonden: maandag 21 december 2009 20:06 Aan: [email protected] Onderwerp: [amsat-bb] Unable to use HO-68 in JO21 (18:37 UTC) Hi, I was unable to open the uplink with my Yaesu FT-847. The PL tone was set 67.0 Hz but unable to open the uplink channel. During the pass I tryed the following. - Checked Subtone.SQF file twice SatPC32 (XW-1,67.0,$3F,1) - Checked Doppler.SQF (XW-1,435675,145825,FM,FM,NOR,0,0,Repeater-BBS) - Restarted SatPC32 - Switched of and on the Yaesu FT-847 - Did a manual setup via menu option 12 for the tone frequentie - Used FMN on the uplink Nothing worked :( There where only three or four stations active during this pass and that makes me wonder if I was the only one with tone problems? I did receive some BBS Packets: BJ1SA-12>BBSTAT>UI,C,F0: Open BJ1SA-12:0 BJ1SA-12>BBSTAT>UI,C,F0: Open BJ1SA-12:0 Maybe beter luck next time 73's PE0SAT _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.717 / Virus Database: 270.14.116/2578 - Release Date: 12/20/09 20:35:00 _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
