On Sat, March 6, 2010 23:39, Peter Wilson wrote: > Hi all, Hi Peter,
> My Gulf antenna arrived last week and togther with my recently aquired > FT-736 I should be up and running within the month. When you have some experience with your Gulf Alpha I hope to hear how it is doing. I really love the design and the way they are build but have no idea how the perform. > My initial reason for building my satellite station was to receive and > decode telemetry from the sats, hoping to monitor their condition over a > period of time. I realise that some transmit TLM via morse, some via > AX25, and some via 96K packet. I decode also a lot of telemetry from the following sats: DO-64: Via RASCAL that can be downloaded via there website www.delfic3.nl FO-29: Morse HO-68: Morse RS-30: Morse RS-38: Morse etc etc Only the sats that use 9k6 are out of my league but that will change in the next couple of months > What would be the best sat to start with, especially AX25? - Does AO51 > send TLM all the time or only over the USA? What resource is the best for > reading? Does the F&-736 need modifying for high speed packet reception? For more detail on decoding with the FT-736 look at the website from dk3wn (www.dk3wn.info) > Many thanks for any help. > > Peter > G8KEK 73 Jan PE0SAT -- With regards PE0SAT Internet web-page http://www.ham.vgnet.nl/ _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
