This was my experience with a KLM 435-40CX and no preamp into a FT-736R. I had to energize the relay on the antenna in order to hear them. I assume it's RHCP normally, and LHCP when the relay is energized.
I actually had better copy during the SSB portion than the CW, but am not sure why that was. --Mike WQ5C On 4/17/2010 4:31 PM, i8cvs wrote: > Hi Bob, W7LRD > > What polarization have you used on your 40 el cp ? RHCP or LHCP ? I am sure > that with LHCP it was a very consistant signal and with RHCP nothing was > heard. > > Please confirm ! > > Tanks > > 73" de > > i8CVS Domenico > > ----- Original Message ----- > From: "Bob- W7LRD"<[email protected]> > To:<[email protected]> > Sent: Saturday, April 17, 2010 10:57 PM > Subject: [amsat-bb] Arecibo > > > >> >> Very consistant signal 910/40el cp. I wish they would use dxpedition qso >> > methods for more qso/hr. This is a very finite opportunity. Had fun anyway, > better luck tomorrow. > >> 73 Bob W7LRD >> _______________________________________________ >> Sent via [email protected]. Opinions expressed are those of the author. >> Not an AMSAT-NA member? Join now to support the amateur satellite program! >> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb >> >> > > > _______________________________________________ > Sent via [email protected]. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
