On 20 Apr 2010 at 17:38, Bob- W7LRD wrote:

Date sent:      Tue, 20 Apr 2010 17:38:07 +0000 (UTC)
From:   Bob- W7LRD <[email protected]>
Subject:        Re: [amsat-bb] Re: AO-51 V/S
To:     Luc Leblanc <[email protected]>
Copies to:      [email protected], [email protected]

> 
> 
> Hi Luc and all 
> 
>I am using a Transystem 3731AA downconverter.  Also an old Kenwood TS-700A for 
>the tunable IF.  I have compared Keps 13LNC-PH 
downconverter against the 3731.
>The 3731 is virtually immune to desense to 2M tx as well as wifi etc.  However 
>the Keps (pricey) is affected by the 2M tx.  Without the 
>noise blanker turned on in the TS-700 I get lots of snapping, popping from 
>wireless phones, wifi etc.  The noise blanker in this old 700 
>is superb, better that the one in my 910!  Go figure!  Mind you this is all 
>empirical evaluation using nothing but my ears.  I have heard 
>the filter in the 3731 is better than most.  I will be shipping some of my 
>dc's soon to a fellow who can give a very accurate evaluation 
>on these devices.  Hope this helps Luc, see you on S band! 
> 
> 73 Bob W7LRD 
> 
> 
Hi Bob

I have the same DC but my IF is on 123mhz and i got no desense at all on 2M but 
that's the 2.4Ghz RF your "snapping, popping" who i think 
is could be reducing the RF sensitivity of the DC. The AIDC was design to 
received MMDS TV where channels where isolated from each other 
and they was no other QRM on the original band this downconverter was design 
for. How he's performing on a band full of QRM that i don't 
know and it will be something to test to see if the DC keep his same 
sensitivity when is QRMed on 2.4Ghz.

Adding some sort of flitration is could be a way to reduce any 2.4Ghz desense 
if any and what the noise blanker does is to suppress the 
pops and clicks but he cannot reduce the overall QRM level. 

Our regular Ham receiver can be tweaked for the best reception possible but 
with a DC we are stuck with a static passband, no way to reduce 
the RF level and so on.

I don't know how wide the AIDC 3731AA front end was but to be able to receive 
TV signals it should be quite wide and he should pass a lot 
more than 15KC?

"-"


Luc Leblanc VE2DWE
Skype VE2DWE
www.qsl.net/ve2dwe
DSTAR urcall VE2DWE
WAC BASIC CW PHONE SATELLITE

 

_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Reply via email to