Hi All,

First off I wanted to say thank you for all the QSOs during my mini 
gridexpedition to Colorado!  I made 138 QSOs on 21 passes from 3 grids in 
Colorado and 3 in Kansas - EM08 (KS) mobile on the way out, DM78, DN70 and DN60 
portable in Colorado and EM08, EM19 and EM29 mobile in Kansas on the way back.  
Hopefully I got some of you a couple new grids.  I have already received 
several QSL requests, and I will respond to these as soon as I get the cards 
in.  Unfortunately, the cards will probably not be in from UX5UO print for 4-5 
weeks.  I will try to send out an email when I have a better ETA.  If you would 
like a QSL, please send your request to my address listed on QRZ.com.  An SASE 
would also be appreciated to help defray postage costs.  

Operating conditions were very favorable for the most part of the trip.  
Interference from mountains was very minimal, and the weather was fantastic!  I 
did not do much operating at the beginning of the trip, only the mobile 
operating in EM08.  We arrived on Friday and spent the next couple nights at an 
RV resort south of Colorado Springs.  On Saturday we ventured up to Pike's Peak 
(DM78), and I was able to operate one AO27 pass before we had to go down due to 
the thin air.  My Mom overheard the interesting conclusions people were coming 
to as to what I was doing - "He is a Ham Radio operator"; "He is with the Air 
Force Academy"; "He is talking to the world".  I thought these were pretty good.

The following day (Sunday) I was able to get on from DM78 for a second time on 
an early morning SO50 pass.  It was nice to be able to work a few of the 
eastern stations along with K8YSE/p who was doing a satellite demo at the 
Findlay hamfest.

Sunday afternoon we traveled up to Estes Park in the Rocky Mountain Park and 
setup camp for the night at a park campground.  Operating became a little more 
consistent over the next few days from DN70 with 13 of the 21 passes being done 
from this grid.  

On Wednesday we took a little side trip down to Grandby on the southern side of 
the park to do a DN60 grid activation.  I really wanted to do the DN70/60 
boundary, but there was no suitable place to operate along Rt. 40.  We ended up 
driving about a mile into DN60 before taking a gravel back road (and I mean 
back road) up into public land in the hills in search of a higher spot to 
operate.  Just to give you an idea of how back road-ish it was, there were cow 
skeletons along the road.  It was true "cowboy country".  Anyway, we found a 
spot about a mile up the road and got set up about 45 minutes before the AO27 
pass at 1929z.  This enabled me to get on the 1905z HO68 pass and work a few 
stations.  Four contacts were made on HO68 with 21 on AO27.  I hope that 
everyone that wanted this grid was able to get it.  I wanted to stay longer, 
but we needed to get back across the mountains (which is a 2 hour trip) before 
dark.

Operating continued from DN70 until we left on Friday.  Friday evening I was 
able to get on AO27 from EM08, SO50 from EM19 and AO51 from EM29 (KS side).  It 
was really fun to be able to work into the birds with a quarter wave mounted on 
the van roof.  I could only hear between approximately 35-75 degrees which kept 
operating mobile short, but it was fun to make a few more QSOs using different 
equipment.

Videos of the Pike's Peak operating and the DN60 grid activation have been 
uploaded to YouTube (look under KD8KSN), and to my QRZ page as well.  The 
footage was not the best, but it gives you an idea of how high Pike's Peak is, 
and how remote the DN60 activation was.  Pictures have also been uploaded to my 
QRZ page.

Thanks again to everyone who supported me during this trip, and for all the 
contacts!  I certainly hope to return to more rare grids in the future.

73!

Zack
KD8KSN


_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Reply via email to