Using FT 847. 73 Bill
----- Original Message ----- From: "Dee" <[email protected]> To: "'Bill Gillenwater'" <[email protected]>; "'AmsatBBS'" <[email protected]> Sent: Saturday, January 22, 2011 11:04 AM Subject: [amsat-bb] Re: Rotor Interface Yaesu 5500 > Bill, > There is a nice interface being sold by AMSAT - LVB tracker box...Only > need > an RS232 or USB to operate it running SatPC32... You didn't mention what > rig > you have - you can interface with that via SatPC32 also - See the ad at > the > AMSAT website... > Good luck, > Dee, NB2F > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Bill Gillenwater > Sent: Saturday, January 22, 2011 10:20 AM > To: AmsatBBS > Subject: [amsat-bb] Rotor Interface Yaesu 5500 > > OK, a newbee question about interfacing rotors. I have a Yaesu 5500 and I > run PCSat32. What do I need between the rotor and the computer? I would > like > a few options. Do I need the Yaesu 232 interface box or will a generic box > do the job. If a generic box will work, which are the best for satellite > work with PCSat32? > > Tnx 73 Bill K3SV > _______________________________________________ > Sent via [email protected]. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > > > _______________________________________________ > Sent via [email protected]. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
