Hi David, Bring up the Windows "Volume Control" and on the mixer panel for playback, enable "Line In" or "Microphone", whichever you are using for the input. You can adjust the volume with the slider.
73, Tony AA2TX --- At 06:21 PM 4/11/2011, [email protected] wrote: >Hi all. > >I have a minor (probably operator error) with the TLM software. > >Is there a way to get the audio to feed through to the PC speakers? I've >tried Spectran and Spectraview without problem, but the ARISSat software >does not appear to send audio out on my system. I cant hear the radio as I >have a jack in the headphone socket which mutes the radio's speaker. > >The software is working. I can decode the CW callsign and locator of a 2m >beacon and the level is controlled nicely with the windows 'microphone' >record level. > >It's not muted >It's got the correct input selected and the gain turned up. > >But.....no audio out...so I'm just setting the frequency by visually >putting the signal in the right place. > >73 > >David >_______________________________________________ >Sent via [email protected]. Opinions expressed are those of the author. >Not an AMSAT-NA member? Join now to support the amateur satellite program! >Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
