Tom,

I operated that same pass of FO-29.  I started with a nice conversation with 
Mike, WA8EBM (Michigan), then moved on to another nice conversation with Drew, 
KO4MA (Florida).  All three of us were using full Doppler control.  It was 
great.

I then heard you trying to chase W5BK across the passband.  It is a challenge, 
and good practice.  ;-)

I'm not knocking W5BK or any other operator who isn't using full Doppler.  It 
takes a lot of skill (a skill I never mastered) and there can be good reasons 
for using manual tuning (like running portable).  And I'm grateful for every 
contact I make, including with W5BK, WD9EWK, and ND9M, all of whom use manual 
tuning.

But I agree with Alan, if you're in a position to run full Doppler, do it!

73, Steve N9IP
--
Steve Belter, Indiana Dataline Corp
427 N 6th Street, Suite C
Lafayette, IN 47901-2211
Tel: (765) 269-8521
www.indiana-dataline.net



-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf 
Of Alan P. Biddle
Sent: Sunday, July 24, 2011 6:27 PM
To: 'Tom Schaefer, NY4I'; 'Amsat BB'
Subject: [amsat-bb] Re: Should I abandon full doppler correction?

Tom,

There was an article in the Journal a few issues back on why the various manual 
techniques are only approximations, sometimes surprisingly bad ones.
I think the author's call was WA4SCA.  So it does get talked about. With an 
accurate clock, and current Keps it is possible to work a full pass and 
scarcely touch the dial.  It definitely makes it easier to conduct a round 
table.  If the transponder uses either modes L and/or S, you really don't have 
much choice.  The change rate is just too fast for practical manual running, 
though VE3NPC does an amazing job.  Even FM, which is very forgiving is a 
challenge for manual tuning at those frequencies.  

My default is for full Doppler correction.  If the other station is using it, 
fine.  We can concentrate on communicating.  If not, I switch off and do it the 
traditional way.  It does provide some gentle encouragement to try a new 
method, and gives you an opportunity to spread the word.  I am embarrassed at 
how long I stuck with paper logs amid all this technology.  I experienced a lot 
of nostalgia when I transferred all my old satellite contacts to electronic 
format, but I have never looked back.

Hang in there.  As time goes by, you will see more stations using it, as they 
won't have to unlearn years of experience.  Just remember that it is a hobby, 
and there are many for whom tuning and pointing are an integral part of 
satellite operations.  Have fun!

Alan
WA4SCA
  

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf 
Of Tom Schaefer, NY4I
Sent: Sunday, July 24, 2011 4:17 PM
To: Amsat BB
Subject: [amsat-bb] Should I abandon full doppler correction?

Hi all,

I just tried a nice pass on FO-29. I heard K9CIS on CW and W5BK from Texas.
In both cases, while I am using full doppler correction with my 9100 and 
MacDoppler, I suspect they are leaving the transmit frequency fixed as they 
both changed frequency. K9CIS on CW was quite extreme in the Doppler shift.
I know that this is a by-product of me using full doppler to listen to stations 
that are not, but it seems that the majority of the stations I hear are NOT 
using flu doppler. I have asked this question before, but it seems to be 
happening more frequently.


Should I abandon full doppler correction? Another less black-and-white step is 
that if I hear a station moving to adjust my settings so I am not doing full 
doppler. 

Has anyone ever taken a survey to see how many satellite users actually use 
full doppler. Am I assuming more guys use computers and anyone of the multiple 
ways to do computer control that have ben available for years? Does anyone ever 
talk about this in AMSAT circles? Sort of like the encouragement one gives to 
people afraid of LOTW to try it? "Computers in the shack.NEVER!" I exaggerate 
but it seems that way. Then again, being a computer person and having computer 
capable rigs I realize I am skewed in my expectations. I know there are guys 
working with old 271/471 pairs or even the old FT726 out there. Great radios 
and a simple way to do it, but even they have ways to do full doppler control 
and they have been out for 20 years. 

Thanks,

Tom
Tom Schaefer, NY4I
[email protected]
EL88pb
Monitoring EchoLink node KJ4FEC-L 489389 DSTAR Capable  APRS: NY4I-15




_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb


_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Reply via email to