Hi Henk. I've had some issues with decoding BPSK too. Worked fine on the first day, then unable to decode anything. Eventually I reloaded the software and played a wav file through the system. Finally it began decoding again. I don't really know what the problem was. It still will not send tlm via the internet and I can't get sound out...Hence the wav files.
Problem is the wav file I have is large so I cant send it to you to try. Perhaps some one has 30 seconds worth that does decode, then we can use that as a standard to check our systems. I've been tracking doppler by hand. Seems to work OK but it's very important to keep the CW in the 'blue' window. I would think jumps would not be good. Perhaps frequent doppler updates. - So very small jumps. I also heard HB9 last night on the transponder, but in low power mode (45 sec)that is difficult. - I'll wait for some daylight passes. Good luck David G0MRF -----Original Message----- From: PA3GUO <pa3...@amsat.org> To: amsat-bb <amsat-bb@amsat.org> Sent: Mon, 8 Aug 2011 10:41 Subject: [amsat-bb] ARISSat TLM decoding using FCD Just sharing the results of my recordings of last night: (using the FCD + HDSDR) - FM voice works fine - Xponder works fine (HB9AOB was very clear) - CW decoding works fine (the Tuning indicator locks on the CW bump) - BPSK decoding did not work (I hear & see the signal, but no decode) Is the BPSK decoding very sensitive to doppler / freq hops ? Henk, PA3GUO _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb