I am not familiar with either Nova or the Uni-trac 2003, but I can say that
split mode is the only way for the 910H to handle doppler a satellite such
as the ISS with the uplink & downlink in the same band. For V/U and U/V
satellites, it should put the uplink on the sub-band, while the downlink
appears on the main band.
George, KA3HSW
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Cc: <[email protected]>; <[email protected]>
Sent: Saturday, August 20, 2011 8:40 PM
Subject: [amsat-bb] satellite tracking problem (stb)
using the uni_trac 2003 control my icom 910h xcvr switches between vfo a
and vfo b (via the split function in the radio when) I try to track the
iss. Is there a known fix for this satellite and any other amateur radio
satellites. I am having a problem with nova allowing the 2003 to tune the
910h radio as well as control the az el function of my g5500 rotors. I
have talked with Mr. John Bealand just this week about these problems and
his suggestion was to post them on the amsat-bb. help on how to overcome
these problems is greatly appreciated, Al T.
____________________________________________________________
Penny Stock Jumping 3000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.juno.com/TGL3141/4e5062613ba837a71c5st03vuc
_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
