Hi Carl !
MCubed & RAX use 9k6, you see that in an SDR, but don't really hear it. Aubiesat is CW, but relative weak. I would start with Explorer 1. Explorer-1 uses 1k2 and you can clearly hear that in USB or LSB. Also its signal is relative strong compared to the other sats. Finally, you can decode it by just playback audio (eg mp3) via MixWin. It transmits every 15 seconds a burst. Downlink frequency is 437.505 MHz. Step 1: see if you hear it (and let us know - I am interested) Step 2: decode it Henk, PA3GUO (antenna: 16 element, horiontal beam, pre-amp: SSB mast-mounted, RX: FCD SDR) >FB Mike. Could you share which Keps you were using? Also, what mode >did you use? What is your setup...radio, TNC, etc? > >I have had no luck with any of the projects. I would like to try M-Cubed. >-- >*Carl W8KRF* _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
